If you’re thinking of some ways on how to soften hard water and if you have a well water source, then you’ve come to the right place. The good news is that you can actually save a thousand gallons of water and a thousand pounds of salt pallets with a Genesis upflow water softener.
This Genesis upflow water softener review will save you from consuming much time on research. We have all the information you need to know- summarized and simplified just for you.
Genesis Upflow Overview
All models of Genesis water softeners are meticulously designed, assembled, and engineered in the USA. New models having more features than the previous ones.
For more than 25 years of service in residential and commercial water treatment, no one certainly knows water softeners better than Discount Water Softeners.
In this Genesis upflow water softener review, we have compiled its features to make things easier for you. Here are some of the reasons why this product is a must-have.
Ease of Use
The programming is pretty basic, you could learn the settings all at once. One thing that you have to remember is to refill the salt reservoir before it becomes empty for system maintenance.
Installation is also made faster and easier than ever. According to existing customers, it would only take them about 30 minutes to 2 hours to properly identify the specific things and hinge the existing lines into the water softener. This can be done even though it is their first time doing so. You just have to read the manual and do the work with ease.
Using this softener is pretty efficient since it is digitally metered at the same time uses upflow regeneration. For sure, you would be able to save up to 64% less water and 75% on salt. Thus, it will also save you money in the long run.
Well, the direct flow design allows it to perform with fewer parts in motion. It utilizes reverse flow regeneration that is responsible for preserving softening beds that are unused. For sure, this can prevent unnecessary exchange thereby saving more salt of up to 30%.
In addition, it utilizes green technology that also aids in reducing salt discharge at the same time ensures that it is eco-friendly.
Unlike downflow which pushes the “dirty” water past the clean charged resin, the up-flow regeneration would drive the water in an up-flow manner. It moves with a swirling motion from the tank’s bottom-up through the resin.
The recharge is more precise, allowing the system to recharge the depleted resin only. A short recharge restores the system every time that it drops below 3%.
Genesis Upflow on Demand has spacer and seal design, as well as adjustable cycles and electric sensors which facilitates controlling valves accurately.
Advanced Smart Digital Control
This water softener is designed with advanced digital control providing precision on brining. Depending on your water source, it would enable you to reduce salt usage by up to 45%.
Compared to other standard water softeners, its selective backwashing will reduce your water usage for as much as 64%. Moreover, as it uses an internal piston with seal design and an enhanced piston stabilizer, a minimum amount of salt is needed to be refilled on every regeneration. It has been used and tested proven for over 30 years now.
There is a lifetime warranty on the Salt Grid which is responsible for preventing the Safety Overflow to float during the salt bridging. The resin tank has a limited lifetime warranty as well and the control head unit with a 10-year limited warranty.
only maintenance needed on a water softener is adding the right amount of salt
and water. Typically, this can be done quarterly or annually. On the
regeneration of Genesis Upflow, 9 pounds of salt and 44 gallons of water are
required. This will equate to annual spending of about 150
on salt and about 2000 gallons of water in order to maintain the
With the myriad of options on sale, you may be overwhelmed when choosing the best home water softener. Now that you know the outstanding features of this product, you are sure that it is worth an investment. Anyway, here are some of the factors that you should consider when buying one:
Although the product in this review is quite pricey, the cost is reasonable given its functionality. It is sure to soften hard water. But if you’re not willing to pay for a high price, there are other options that are low-priced without compromising the quality.
All kinds of water softeners are given ratings by grains. These are mineral particles that the product will be filtering before regeneration. Usually, these grains consist of magnesium and calcium. They are usually found onto fixtures and inside pipes. Not to mention, they can stain sinks and leave spots on dishes.
That is why the number of grains the softener can filter matters. The more the product can soften grains, the more it is likely. So when choosing a product, make sure that it has an excellent grain rating.
Ease of Installation
Not all water softeners are easy to install. Look for a model that can be installed with ease so that you won’t find it difficult in doing so. It is favorable if the product comes with a manual that can be easily understood. Just like the Genesis Upflow Water Softer, it only takes a maximum of 2 hours to make everything intact.
Of course, it is very crucial to consider this factor. If a product is durable, then you’re sure that it can be used for a longer time. This can also be linked to the materials it is made of. Just like the product in this review, it is designed with an internal piston that can last up to 30 years.
It is inevitable for hard water to build-up. That’s why you need to perform minor repairs such as changing o-rings and replacing a faucet. It is recommended that you let a professional do the repair. Usually, it will be ideal to repair it if the model is under 5 years old.
Of course, there’s also a need to incur an additional cost. Just like other softeners, you have to replace the brine material periodically. All you have to do is to measure the levels in the tank and that should be done every 3 to 4 months.
Pros & Cons
Height: 51 inches overall height with 10×44 resin tank and 7 inches control valve
Service Flow Rate: 13 GPM at 15 psi drop
Required Backwash Rate: 2.0 gpm
Type: Meter Initiated
Electrical Power Requirements: 120v/60h
Size: 40000 grains
Brine tank capacity: 30 pounds of salt
Our Verdict: Recommended
Given all of the features of the Genesis Upflow On Demand, it is sure to solve hard water issues. Without a doubt, it is a great choice for the sum of money.
Aside from its high-performance as mentioned in this Genesis Upflow water softener review, it is also easy to install and eco-friendly.
From these features alone, you will be amazed at how reliable, effective, and efficient it is. Much more with the amount of water, salt, and money that you will save.
There’s no need for you to wait longer. It is a need for you to install this product at your home, office, or commercial buildings.